点击图片查看原图
[VIP第13年] 指数:7
通过认证 
| JHC-18 | JHC-18S | JHC-18A | JHC-18AS | JHC-18B | JHC-18BS | |
| Standard work rest (dia.) | Ø1 ~ Ø50 mm | |||||
| Special work rest (dia.) | Ø40 ~ Ø100 mm | |||||
| Grinding wheel size (dia. x width x hole) |
Ø455 x 205 x Ø228.6 | Ø455 x 255 x Ø228.6 | Ø455 x 305 x Ø228.6 | |||
| Regulating wheel size (dia. x width x hole) |
Ø255 x 205 x Ø111.2 | Ø255 x 255 x Ø111.2 | Ø255 x 305 x Ø111.2 | |||
| Grinding wheel speed | 1500 R.P.M | |||||
| Regulating wheel speed | 13-316 R.P.M (10 steps) |
10-250 R.P.M variable speed |
13-316 R.P.M (10 steps) |
10-250 R.P.M Variable speed |
13-316 R.P.M (10 steps) |
10-250 R.P.M bariable speed |
| Grinding wheel motor | 15 HP | 15 HP | 20 HP | |||
| Regulating wheel motor | 2 HP | 2.9kw Servo Motor | 2 HP | 2.9kw Servo Motor | 2 HP | 2.9kw Servo Motor |
| Hydraulic pump motor | 1 HP | |||||
| Coolant pump motor | 1/4 HP | 1/2 HP | ||||
| Regulating wheel feed on handwheel | 3.5 mm (Rev) 0.05 mm (Gra) | |||||
| Regulating micro feed on handwheel | 0.1 mm (Rev) 0.001 mm (Gra) | |||||
| Table feed on handwheel | 9 mm (Rev) 0.05 mm (Gra) | |||||
| Table micro feed on handwheel | 0.2 mm (Rev) 0.001 mm (Gra) | |||||
| Dressing handwheel | 2 mm (Rev) 0.01 mm (Gra) | |||||
| Regulating wheel tilt angle | +5° ~ -3° | |||||
| Regulating wheel swivel angle | ±5° | |||||
| Floor space (L x W x H) | 2300 x 2000 x 1530 mm | |||||
| Net weight / Gross weight | 2800 kgs / 3100 kgs | 2900 kgs / 3200 kgs | 3000 kgs / 3300 kgs | |||
| Size of case (L x W x H) | 3200 x 1400 x 1900 mm | |||||
